These days, starting your Jeep from a distance is a breeze – just use your key or the Uconnect app. It’s a beautiful feature that makes hopping into your Jeep super convenient. Sometimes, the Jeep remote start decides to take a day off, and it’s not uncommon.

There are a bunch of rules for this remote start magic to work – close the doors, shut the hood, make sure the gear selector is in the park, and keep the PANIC button in check. If any of these boxes aren’t ticked, your dashboard might flash an error like “Remote Start Disabled System Fault” or “Jeep remote start disabled start vehicle to reset” and your remote start won’t cooperate.

Now, aside from the obvious stuff, like a wonky key or low battery, there are other reasons why your remote start might need to be playing hard to get. Sometimes time Jeep remote start not working in cold weather, Low fuel, a lit-up check engine light, doors or hood not appropriately closed, wonky programming, or maybe you’ve been a bit too trigger-happy with the remote start button without using your key – all potential culprits.

Don’t fret! In this article, I’m going to help you figure out what’s up and how to fix it. Let’s dive in!

What Does the Remote Start Disabled System Fault Mean?

For your Jeep to start remotely, a bunch of things need to be just right:

• Make sure the gear is in PARK.
• All doors and the hood should be closed.
• Keep the liftgate shut.
• Turn off the hazard switch.
• Don’t press the brake pedal.
• Ensure the battery has enough charge.
• The PANIC button should be off.
• No issues from the last remote start.
• Check for a flashing car alarm light.
• Ignition must be OFF.
• Fuel level needs to be good.
• Tire pressure should be expected.

If any of these conditions aren’t met or if there are other problems, your Jeep’s remote start might act up. You could see messages like remote start disabled system fault or remote start disabled, start vehicle to reset. This happens commonly with Jeep models like Compass, Wrangler, Gladiator, Renegade, Cherokee, and Grand Cherokee.

Also, suppose the vehicle can’t start remotely or stops too soon. In that case, you might see messages like:

• Remote Start Cancelled: Door Open
• Remote Start Cancelled: Hood Open
• Remote Start Cancelled: Fuel Low
• Remote Start Aborted: Timer Expired
• Remote Start Aborted: Liftgate Open

And remember, until the ignition is ON, these messages will be on the instrument cluster display.

Read also: Jeep Touch Screen Freaking Out

The Reasons Behind Jeep Remote Start Not Working & Possible Solutions:

Let’s dig into why your Jeep might be acting up with the “Remote Start Disabled System Fault” and “Remote Start Disabled Start Vehicle to Reset” errors and figure out how to fix them. There are a bunch of reasons this could be happening:

• Your crucial fob might need fixing.
• Battery problems could be in the mix.
• Cold weather can throw a wrench into things.
• If your fuel level is running low, that could be the culprit.
• Check if your check engine light is on.
• Problems with doors being ajar.
• The hood needs to be closed properly.
• Incorrect programming of the remote start.
• Some remote starts need the key to be inserted.
• Keep an eye on tire pressure and coolant levels.
• Transmission solenoid issues might be at play.
• Make sure valet mode is doing everything correctly.
• Check if hazard lights are active.
• Ensure your vehicle is in park mode.
• Confirm the remote starter switch isn’t disabled.

Out of these, the most common hiccup is usually the battery. If it’s dead, your remote start won’t cooperate. Swap out the battery, and fingers crossed, it should work again!

But if your battery is fine and you’re still seeing those error messages, don’t worry. We’ll go through each step to pinpoint the problem and get it fixed pronto. Ready?

Let’s get started!

1. Key Problem

So, if your Jeep remote start isn’t working and it’s showing messages like “remote start disabled system fault” or “remote start disabled start vehicle to reset,” the likely culprit is a dead battery in your Jeep key fob.

But wait, there’s more! Your key fob might also be damaged. If that’s the case, you can either get it repaired or replaced. Don’t rush to replace it—check with a reliable repairer first.

Here’s a heads up: sometimes, your key fob might act up if there’s radio interference in your current location. Weird, right?

2. Battery Issues

If that battery is feeling under the weather, your Jeep’s remote start might decide to take a rain check. Why? Well, when the magic of starting begins, and the voltage isn’t up to snuff, the whole process throws in the towel before the starter even gets involved. 

Now, when you put both a good and a bad battery on a test bench, you might see a slight difference in the amps they can deliver. But here’s the secret: it’s all about that voltage, especially when you’re cranking.

Now, if you’re getting those error messages like “remote start disabled system fault” or “remote start disabled start vehicle to reset jeep,” fear not. Here’s the lowdown on fixing it:

1. Get your hands dirty (figuratively, of course). Clean up any gunk and make sure all those connections are snug as a bug.
2. Give your car’s battery some love. If it’s feeling drained, give it a boost – charge it up or try a jump start. You might need a new one if it’s on its last legs.
3. Sometimes, it’s not the battery’s fault. Wonky starters and alternators can mess with the charging game. If that’s the case, have a chat with your dealership or a trusty mechanic.

Keep that battery happy, and your remote start will be singing again soon.

3. Check Engine Light Is On

Ever wondered if your Jeep’s remote starts to kick in when the check engine light is on? Well, here’s the deal: if that pesky light is glowing, your Jeep’s engine is facing some issues, and it needs a speedy fix. 

In this scenario, the remote start won’t budge. Instead, you’ll see messages like “remote start disabled system fault” or “remote start disabled start vehicle to res” flashing on your dashboard.

The culprit here is those specific engine codes – they act like bouncers, blocking the remote starting party until the issues are sorted. So, before you can enjoy the luxury of remote start, you have to tackle the check engine light situation. 

Figure out what’s triggering it, and that’ll be your ticket to getting the remote start back on track. It’s like a safety measure – when your Jeep’s computer senses trouble, it plays it safe and shuts down the remote start.

For a quick diagnosis, swing by a dealership. They can run a scan to pinpoint the causes behind the remote start lockdown. Usually, the last five error codes are stored in the history. Oh, and a friendly advice: don’t take your Jeep for a spin in this situation. Safety first!

4. Too Many Remote Starts Without Inserting the Key:

You can only remotely start your car twice, and it’s okay if one attempt doesn’t work. But if you keep trying to remote start it without actually turning the key and starting the engine, it’ll stop letting you do it. To fix that, just start your car the regular way to reset the system.

5. Cold Weather

Ever noticed your Jeep’s remote start acting up, especially on cold mornings? Well, the cold can mess with things. The little battery in your key and the car’s main battery under the hood might not be at their best when it’s icy. Snow on the hood doesn’t help either. 

Cold weather can make these batteries and the signal range a bit cranky. Even the electronic bits in the key fob might slow down when it’s cold, messing with how well it does its job.

But if everything’s running smoothly in the cold, your Jeep’s remote start should be A-okay. No mystery there. So, if you’re having issues in chilly weather, blame it on the batteries and electronics, not just the temperature outside.

6. Door Ajar Problem

If your Jeep’s doors aren’t closed right, that’s what “door ajar” means. And when that happens, the cool Jeep remote start won’t work. Your screen will tell you, “Remote Start Aborted Door Ajar.” No worries, though. Just pop the door open and close it properly. Usually, that’s all it takes to fix.

But, if the issue sticks around, the door latch might be acting up. In that case, you should get a mechanic’s opinion. They can either fix or replace the latch for you.

7. Hood Ajar Problem

If your Jeep’s hood isn’t shut correctly, your dashboard might show an error. This can stop your remote start from working, and you’ll see a message like “remote start aborted hood ajar.” Just pop open and close your hood to see if the error goes away.

If the issue sticks around, the hood switch might be acting up. Usually, it hangs out near the hood latch. To fix this, you’ll need to swap out the hood latch.

Even after changing the hood switch, if the problem lingers, there’s another trick. You can add a resistor to bypass the hood switch. But I recommend getting a pro to handle this. It’s a bit technical!

8. Incorrect Programming of Remote Start

Alright, here’s a more straightforward and conversational version:

So, the data thingy in your remote starter makes it easier for your car’s computer to chat. But, if your Jeep’s computer is acting up, it can mess with the remote start feature. It could be a software glitch, a programming hiccup, or just a system snafu.

• Check out the computer programming in your Jeep.
• You should update the software.

Please don’t go all DIY superhero on it. Take your ride to the dealership, let a mechanic do their thing, and professionally reprogram the system. Trust me, doing it yourself could stir up more trouble. Once the programming puzzle is solved, your remote start should be back to its smooth self.

9. Low Fuel Level

If your Jeep is running low on gas, the low fuel light pops up, and guess what? Your fancy remote start won’t cooperate. The screen will give you a little heads-up saying, “Remote Start Cancelled — Fuel Low.”

And if by some miracle it does start, it’ll play hard to get and shut down in 10-30 seconds. Easy fix, though – just gas up your Jeep, give it another shot, and hopefully, all your troubles will vanish.

10. Tire Pressure and Coolant Problems

If your Jeep remote start isn’t working, a few things could be causing the issue:

• Low tire pressure.
• High coolant temperature.
• Insufficient coolant in the radiator or expansion tank.
• High or low oil pressure as indicated by the oil pressure sensor.

If any of these problems occur, your Jeep might display a warning like “Remote Start Disabled System Fault” or “Remote Start Disabled Start Vehicle to Reset.” To fix this, you need to identify and address the root cause of the coolant or pressure problem.

1. Check for leaks in both the coolant and oil systems. If you find any, fix them.
2. Add enough coolant or oil to reach the required levels.
3. If needed, repair or replace the water pump and radiator.
4. Allow your car to cool off for about 10 minutes before rechecking the coolant and oil temperatures, especially if the coolant temperature is too high.

Once the coolant, pressure, and temperature levels are back to normal, your remote start should start working again.

11. Transmission Solenoid Problems

So, your Jeep won’t start remotely, and you’re getting the “Remote Start Disabled” message? It might be the transmission solenoid acting up. It’s like the messenger that tells your Jeep to start. If it’s broken, no remote start for you! Also, keep an eye out for that Check Engine light.

12. Valet Mode is Active on the Remote Starter

Ever tried starting your Jeep remotely, and nothing happened? Check if your ride’s in park mode. Remote start won’t work if it’s not safely parked. Safety first! If it’s still not cooperating, there might be other reasons, so keep reading.

13. Hazards Lights are Active

Flashing hazard lights may signal trouble, but they can also disable your remote start. Before you try firing up remotely, make sure those hazard lights are off. A safety feature, folks!

14. Vehicle Not in Park Mode

Did you know that many car remotes have something called ‘Valet Mode‘? It’s a handy feature that temporarily turns off remote starting to keep your mechanic safe while working on your car. Activating it is as easy as holding down a few buttons on your remote.

Are you in Valet Mode? Just check your car’s parking lights. If they don’t flash when you lock or unlock your car with the remote, you’re probably in Valet Mode. But no worries, it’s a quick fix.

To get out of Valet Mode, start your engine and press the brake pedal ten times. Watch for the module to blink twice – that’s your cue that you’re back to normal. Another way to do it is by pressing the trunk and lock buttons simultaneously when starting your car. If it blinks twice again, you’re good to go, no more Valet Mode hassle!

here’s a simplified explanation with a table:

Feature	Description
Valet Mode	A safety feature on many car remotes that temporarily disables remote starting. Helpful in protecting mechanics working on the car.
Activation	Hold down specific buttons on the remote to activate Valet Mode.
Indicator	Check the car’s parking lights. If they don’t flash when using the remote to lock/unlock, you’re likely in Valet Mode.
Deactivation	Two methods: 1) Start the engine, press the brake pedal ten times, and watch for the module to blink twice. 2) Press the trunk and lock buttons simultaneously while starting the car.
Confirmation	Blinking module twice indicates successful deactivation, and you’re no longer in Valet Mode.

Hope this helps!

15. The Remote Starter Switch is Disabled

So some car remotes have this handy switch that can turn off the remote starter by accident. It happens during regular use, and when that switch is off, your Jeep’s remote start won’t kick in. Usually, you can locate this switch in the car’s fuse boxes or on the dashboard. Once you find it, just flip the switch back on, and your system will be ready to go again.

Decoding the Jeep Remote Start: Essential Features and Troubleshooting Insights

Let’s dive into the world of Jeep Remote Start and uncover its incredible features that make life easier. Find out why it’s a must-have for modern convenience, from easy ignition to added security. 

But wait, there might be a bump in the road! Learn how to troubleshoot common issues effortlessly so that you can enjoy a smooth and hassle-free experience with your Jeep’s remote start system. Time to unlock the mysteries!

Unveiling the Jeep Remote Start Dilemma: Exploring the Pros and Cons

The Pros of Jeep Remote Start

• Convenience: Remote start offers the convenience of warming up or cooling down the vehicle before entering.
• Comfort: Enjoy a comfortable interior temperature in all weather conditions.

The Cons of Jeep Remote Start

• Security Concerns: Remote start may raise security concerns, as the vehicle is temporarily unlocked.
• Environmental Impact: Extended idling from a remote start contributes to environmental pollution.

Revolutionizing Jeep Remote Start: Anticipating Future Solutions and Innovations

Get ready for a game-changer in Jeep Remote Start! Big tech upgrades are coming, and they’re about to shake up how we fire up our cars from afar. Brace yourself for super convenient ways to kickstart your Jeep remotely.

Hold tight for the latest in Jeep Remote Start wizardry. The future’s packing some cool stuff that’s going to amp up your driving adventures. Get set for smoother, more imaginative solutions that’ll totally wow you.

Answers To Key Questions

What causes remote start to stop working?

Depleted vital fob battery, issues with vehicle battery, doors not securely closed, security system activation, or remote start system settings not configured correctly.

How do I get my Jeep remote start to work?

Ensure the essential fob battery is charged, and stays within the recommended range, confirm system activation, lock all doors, check vehicle battery, and review remote start settings in the user manual.

Why is my remote start disabled?

Security system activation, doors not correctly closed, issues with the vehicle battery, or the remote start system may be manually disabled through the vehicle’s settings.

How do I reset my remote car starter?

Consult your car’s user manual for specific instructions, usually involving a combination of button presses on the key fob or ignition. If you need help, seek guidance from a dealership or professional installer.

Final Words

Every Jeep enthusiast is habituated to starting their Jeep using the remote facility. It is essential for persons with restricted mobility who cannot physically turn the ignition key. But it is worrying if the remote start does not work correctly. 

Hopefully, by checking the above conditions, you can now find the exact reason behind the Jeep remote start not working and the best solution. You will never have to see the “Remote Start Disabled System Fault” or “Remote Start Disabled Start Vehicle to Reset” Jeep error again. For any kind of repair or replacement, I suggest going to an expert mechanic to do it the best way. 

Wishing you an excellent experience with your favorite Jeep! If you face any further issues regarding this remote starting, please don’t hesitate to comment below!